F 350 4WD Super Duty V10-6.8L VIN V (2005)
Seat Belt Buckle: Service and Repair
Front Safety Belt Buckle - With Seat Integrated Restraints (SIR)
FRONT SAFETY BELT BUCKLE - WITH SEAT INTEGRATED RESTRAINTS (SIR)
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal
NOTE: Driver side shown, passenger side similar.
All seats
1. Remove the seat on the side with the affected safety belt buckle.
Driver seat
2. Remove the safety belt buckle usage detection switch electrical connector from the seat cushion pan.
All seats
3. NOTE:
-
Note the safety belt buckle usage detection switch wire harness routing for installation.
-
Note position of locator tab for installation.
Remove the nut and the safety belt buckle.
Installation