F 350 4WD Super Duty V10-6.8L VIN V (2005)
10. NOTE: Observe the retainer bracket orientation.
Remove the screws and the bracket.
11. Using an appropriate pry tool, separate and remove the outer and front safety belt web guides.
1
Using a pin-type retainer removal tool, release the two pin-type retainers for the web guide.
2
Remove the front safety belt web guide.
3
Remove the upper safety belt web guide.
12. Remove the nut and the safety belt anchor.
13. NOTE:
-
If reusing the safety belt retractor, do not allow safety belt to completely recoil back into the retractor.
-
Safety belt retractors are specific to LH or RH seats and are not interchangeable.
