F 350 4WD Super Duty V10-6.8L VIN V (2005)
Center Link: Service and Repair
Drag Link - Outer
Drag Link - Outer, F-250, F-350, 4x4, and F-450, F-550
Special Tool(s)
Removal and Installation
NOTE: Replace the tie-rod end if the ball stud is loose in the socket or the tie-rod end is bent. Replace the steering linkage stud dust seal if any nicks,
cuts, or tears are present. Do not attempt to straighten the steering linkage components.
1. Place the steering wheel in the straight-ahead position.
2. Remove the RH wheel and tire assembly.
3. Loosen the 2 adjusting sleeve nuts.
4. Loosen the adjusting sleeve bracket nut.
