F 350 4WD Super Duty V10-6.8L VIN V (2005)
Stabilizer Link: Service and Repair
Rear
Stabilizer Bar and Link - F250
Stabilizer Bar and Link - F250
Removal and Installation
CAUTION: Suspension fasteners are critical components because they affect performance of vital components and systems and their failure can
result in major service expense. Install new components with the same component number or an equivalent component if installation is necessary. Do
not use an installation component of lesser quality or substitute design. Torque values must be used during reassembly to make sure of correct
retention of these components.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the nuts from both lower ends of the stabilizer bar links and remove the washers.
3. Remove the nuts and washers from both upper ends of the stabilizer bar links-to-frame and remove the links.
4. Remove the nuts from both stabilizer bar retainer-to-axle brackets and remove the stabilizer bar retainers, stabilizer bar mounting brackets, U-bolts
and the stabilizer bar.
