F 350 4WD Super Duty V10-6.8L VIN V (2005)
3. Position the clutch disc on the flywheel and the clutch alignment tool in the pilot bearing to align the clutch disc.
^
the 5.4L/6.8L engines accept a 1-1/4 inch input shaft.
^
the 6.0L engines accept a 1-3/8 inch input shaft with 0.98 inch pilot bearing inner diameter.
4. NOTE: Align the index marks if installing the original clutch pressure plate and flywheel.
Install the clutch pressure plate.
1
Position the clutch pressure plate on the dowels.
^
The diesel engine flywheel has two dowels. The gasoline engine flywheel has three dowels.
2
Using a suitable clutch alignment tool, align the clutch disc and the pressure plate.
3
Install the clutch pressure plate bolts and Tighten in a star pattern sequence.
4
Remove the clutch alignment tool.
5. Install the transmission.
6. Test the system for normal operation.