F 350 4WD Super Duty V10-6.8L VIN V (2005)
Fluid - Differential: Capacity Specifications
FRONT AXLE LUBRICANT CAPACITY
DANA Super 60 ................................................................................................................................................................................. 3.02 Liters (6.38 pints)
REAR AXLE LUBRICANT CAPACITY
Dana 80
Conventional and Truetrac ..................................................................................................................................................................... 4.0 Liters (8.5 pints)
Trac-Lok* ............................................................................................................................................................................................... 3.8 Liters (8.0 pints)
*First fill the axle with 0.2365 liters (0.5 pints) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification
EST-M2C118-A.
Dana S110 and S130
Capacity ................................................................................................................................................................................................. 6.6 Liters (14 pints)*
*The lubricant capacity will vary depending upon the housing mounting angle. The capacity given is for an angle of 4 degrees. A lubricant level close
enough to the bottom of the fill hole to be seen or touched is not sufficient. The lubricant must be level with the fill hole.
Ford 10.50-inch Ring Gear
10.50 Inch Axle (1) ................................................................................................................................................................................ 3.3 Liters (6.9 pints)
(1) Add 8 oz. (236 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118A for complete refill of limited slip
Ford axles. Ford design rear axles contain a synthetic lubricant that does not require changing unless the axle has been submerged in water.
