F 350 4WD Super Duty V10-6.8L VIN V (2005)
Seals and Gaskets: Service and Repair
Front Drive Axle/Differential
Drive Pinion Seal
Drive Pinion Seal
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Index-mark the front driveshaft and the front axle flange to maintain driveline balance.
3. Disconnect the front driveshaft from the front axle flange and position it aside.
1. Remove and discard the 4 bolts and 2 retainers.
2. Disconnect the front driveshaft from the front axle flange.
3. Tape the bearing cups to the spider to prevent them from falling off the spider.
4. Position the driveshaft aside.
