F 350 4WD Super Duty V10-6.8L VIN V (2005)
Slip Yoke: Service and Repair
Driveshaft Slip Yoke - Visteon
Driveshaft Slip Yoke - Visteon
Special Tools
Material
Disassembly
1. CAUTION: Do not clamp the driveshaft in the jaws of a vise or a similar holding fixture.
Place the driveshaft on a suitable workbench.
2. Index-mark the driveshaft slip yoke and the stub shaft.
3. Remove the driveshaft slip yoke.
1
Cut and discard the driveshaft slip yoke boot clamps.
