ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Transmission Position Switch/Sensor, A/T|Service and Repair|Page 7360 > < Transmission Position Switch/Sensor, A/T|Service and Repair|Page 7358

F 350 4WD Super Duty V10-6.8L VIN V (2005)

Page 3
background image

2. Install the manual control lever shaft.

NOTE:  Leave a small portion of the pin exposed.

3. Install the manual valve detent lever shaft retaining pin into the case.

NOTE:  When the retaining pin is installed correctly, 2 mm (0.08 in) of the pin will be exposed.

4. Install a new manual valve detent lever shaft retaining pin.

5. Tighten the bolts.

Transmission Position Switch/Sensor, A/T|Service and Repair|Page 7360 > < Transmission Position Switch/Sensor, A/T|Service and Repair|Page 7358