F 350 4WD Super Duty V10-6.8L VIN Y (2006)
Rear Door Latch: Service and Repair
Push Button Rod
Bellcrank, Rear Door, Crew Cab
PUSH BUTTON ROD - BELLCRANK, REAR DOOR, CREW CAB
Heavy Duty Riveter
Special Tool(s)
Removal and Installation
NOTE: The RH door is shown, the LH door is similar.
1. Remove the rear door push button rod.
2. Remove the rear door push button rod linkage.
3. CAUTION: When drilling out the push button rod bellcrank rivet, do not oversize the hole in the door sheet metal.
NOTE: Use the special tool to install the new rivets.
Remove the push button rod bellcrank.
1
Remove the rivet mandrel (center).
2
Drill out the rivet.
3
Remove the push button bellcrank.
4. To install, reverse the removal procedure.
Linkage, Horizontal, Rear Door, Crew Cab
PUSH BUTTON ROD - LINKAGE, HORIZONTAL, REAR DOOR, CREW CAB
Removal and Installation
1. Remove the rear door trim panel.