F 350 4WD Super Duty V10-6.8L VIN Y (2006)
11. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector.
12. Install the RCM fuse F2.26 (10A) to the CJB.
13. Connect the battery ground cable.
Reactivation Procedure
1. Remove the RCM fuse 26 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Remove the restraint system diagnostic tool from the passenger air bag module electrical connector.
4. Through the glove compartment opening, connect the passenger air bag module electrical connector.
5. Push in on the 2 glove compartment door tabs and close the glove compartment door.
