F 350 4WD Super Duty V10-6.8L VIN Y (2006)
2. NOTE: When installing the roof opening panel motor/module, align the 3 attach holes before engaging the drive gear into the roof opening panel
drive cable. Do not rotate the motor assembly after the drive gear is engaged with the roof opening panel drive cable. Otherwise, the cable can
bind.
Install the roof opening panel motor.
-
Align the attach holes, then install the 3 bolts and tighten to 4 Nm (35 lb-in).
3. Connect the overhead console electrical connectors.
4. Initialize the roof opening panel motor/module.
5. Disconnect the overhead console electrical connectors.
6. Install the headliner.
