F 350 4WD Super Duty V10-6.8L VIN Y (2006)
CAUTION: Damage to the camshaft phaser sprocket assembly will occur if mishandled or used as a lifting or leveraging device.
Tighten the camshaft phaser bolt in 2 stages:
^
Stage 1: Tighten to 40 Nm (30 ft. lbs.).
^
Stage 2: Tighten an additional 90 degrees.
22. NOTE: Install the bearing caps in their original locations.
Install the bolts and tighten in the sequence shown.
^
Tighten to 10 Nm (89 inch lbs.).
23. Install the LH valve cover.
