F 350 4WD Super Duty V10-6.8L VIN Y (2006)
Remove the fuel tank.
2. Clean the area around the fuel level sensor lock ring.
3. Remove the fuel level sensor lock ring.
-
To install, tighten to 81 Nm (60 lb-ft).
4. CAUTION: The fuel level sensor must be handled carefully to avoid damage to the float arm.
Completely remove the fuel level sensor from the fuel tank.
5. CAUTION: Make sure to install a new fuel level sensor gasket.
Remove and discard the fuel level sensor gasket.
6. To install, reverse the removal procedure.
