F 350 4WD Super Duty V10-6.8L VIN Y (2006)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler
Material
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power
steering components can result.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Loosen the 2 clamps and disconnect the hoses.
^
To install, tighten to 3 Nm (27 inch lbs.).
3. Remove the 2 bolts and the power steering fluid cooler.
^
To install, tighten to 11 Nm (8 ft. lbs.).
