F 350 4WD Super Duty V10-6.8L VIN Y (2006)
7. Using the special tool, disconnect the drag link from the sector shaft arm.
F-250, F-350 vehicles
8. NOTE: The steering gear bolts have a dry adhesive on the threads.
The bolts must not be reused. Remove the 3 bolts and the steering gear.
^
Discard the bolts.
^
To install, tighten to 150 Nm (111 ft. lbs.).
F-450, F-550 vehicles
9. NOTE: The steering gear bolts have a dry adhesive on the threads.
The bolts must not be reused. Remove the 3 bolts and the steering gear.
^
Discard the bolts.
^
To install, tighten to 300 Nm (221 ft. lbs.).
10. NOTE: The sector shaft arm-to-sector shaft nut has a dry adhesive on the threads. The nut must not be reused.
Remove the sector shaft arm-to-sector shaft nut.
^
Discard the nut.
^
To install, tighten to 475 Nm (350 ft. lbs.).