F 350 4WD Super Duty V10-6.8L VIN Y (2006)
2. If equipped, remove the ball joint grease fitting.
3. Position the front wheel spindle in a vise and remove the snap ring from the lower ball joint.
4. CAUTION: To avoid damage to the components, do not use heat to aid ball joint removal.
Using the special tools, remove the lower ball joint.
5. Using the special tools, remove the upper ball joint.
Installation
1. CAUTION: The grease fitting must be removed from the ball joint prior to installation or damage to the grease fitting can occur.
CAUTION: To avoid damage to components, do not use heat to aid installation.
NOTE: Clean the wheel knuckle ball joint bore.
Position the ball joint into the wheel knuckle.
