F 350 4WD Super Duty V10-6.8L VIN Y (2006)
CAUTION: Do not install any rubber hoses or steel tubing with a bend entering the filter greater than 60 degrees.
4. Using a suitable length of hose, install the filter. Tighten the clamps.
5. Position back the lower splash shield between the filter and lower radiator core support. Install the pushpin.
6. Clean a visible section of the transmission fluid pan and install the sticker.
7. Fill the transmission with clean automatic transmission fluid to the specified level.
^
Verify correct operation.
^
Check the filter for leaks.