F 350 4WD Super Duty V10-6.8L VIN Y (2006)
1. Install the inner shift lever boot ring into the shift lever boot.
2. Install the shift lever boot into the special tool.
^
Apply silicone lubricant to the shift lever boot.
3. Position the shift housing on a vice. Using the special tools, install the shift lever boot into the shift housing.
4. Install the lower gearshift lever and gearshift lever blocks into the shift housing.
^
Install the gearshift lever blocks with the notches facing downward.
5. CAUTION: Do not use a silicone sealing compound.
NOTE: Do not wait longer than 10 minutes to tighten the bolts due to the rapid cure time of the sealant.
Install the shift housing.