F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
14. If equipped, install the EGR solenoid bracket.
^
Position the bracket.
^
Install the bolts.
15. NOTE: The idle air control valve is shown removed for clarity.
Install the throttle body adapter.
^
Position a new throttle body adapter gasket.
^
Position the throttle body adapter.
^
Install four bolts and tighten in two stages.
^
Stage 1: Tighten to 9 Nm (80 inch lbs.).
^
Stage 2: Tighten an additional 85 - 95 degrees.
16. NOTE: The EGR valve is shown removed for clarity.
If equipped, connect the EGR solenoid vacuum and electrical connectors.
