F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Exhaust Manifold: Service and Repair
RH
Exhaust Manifold-RH
Removal and Installation
1. Disconnect the battery ground cable.
2. Raise the and support vehicle.
3. Remove the nuts.
4. Remove the right front wheel and tire.
5. Remove the right front inner fender well.
6. Remove the nuts, the exhaust manifold and the gasket. Discard the gasket.
7. Clean and inspect the exhaust manifold.
8. To install, reverse the removal procedure.
