F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
6. Disconnect the A/C condenser core inlet line.
7. Raise the vehicle.
8. Disconnect the pressure cut-off switch electrical connector.
9. Remove the RH front fender splash shield.
10. Loosen the A/C manifold and tube bolt and remove the manifold and tube assembly.
11. Remove the pressure cut-off switch.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
