F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Fuel Supply Line: Description and Operation
FUEL LINES AND FITTINGS
Fuel Line Assembly
A fuel line assembly (Figure 80) consists of flexible hose and/or stainless steel seamless tubing, end fittings and tube nuts. The hose is a conductive
Polytetrafluoroethylene (PTFE) liner reinforced with a stainless steel wire braided covering. The fittings are inserted into the hose ends and crimped into
place. The stainless steel tubing contains end fittings which are brazed to the tube. There are high pressure fuel lines that are identified by either 1/4-inch
or 3/8-inch outer diameter and a low pressure fuel line identified by a 1/2-inch outer diameter. The low pressure fuel line has a quick-connect at one end
for connection to the fuel rail. The other fittings used on the natural gas vehicle to connect fuel components are SAE O-ring face seal tube fittings. There
are two end types: an O-ring face seal end and a straight thread end. On tee and elbow fittings, a washer and a positionable nut are provided to aid in
orientation of the fitting.