F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Unlock the push rod bushing retaining clips and separate the clutch master cylinder push rod from the clutch pedal.
7. Remove and discard the push rod bushing.
8. Remove the switch cover, and remove the clutch pedal position switch from the clutch master cylinder push rod.
9. Separate the power distribution box from the bracket to gain access to the clutch master cylinder.
10. Unlock and remove the clutch master cylinder from the clutch pedal and support bracket.
^
Compress and twist the clutch master cylinder clockwise 45 degrees to unlock it from the clutch pedal and support bracket.
