F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
17. Using the special tools, install the differential pinion bearing.
^
For model 50 axles, use an axle bearing/seal plate, special tool 205-004, and a suitable press to install the differential pinion bearing.
^
For model 60 axles, use an axle bearing/seal plate, special tool 205-092, and a suitable press to install the differential pinion bearing. -
18. NOTE: On model 50 axles, position the new collapsible spacer inside the differential housing before installing the pinion bearing and the oil
slinger.
Install the new collapsible spacer (model 50 axles), the differential pinion bearing, and the oil slinger.
19. Using the special tool, install the pinion seal.
^
Lightly coat the pinion seal lip with SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL or equivalent meeting Ford specification
WSP-M2C197-A.
^
For model 50 axles, use special tool 205-137 to install the pinion seal.
^
For model 60 axles, use special tool 205-208 to install the pinion seal.
20. On model 60 axles, install a new collapsible spacer.
