F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
24. Using the special tool, install the pinion flange.
25. CAUTION: Always install a new washer and lock nut.
Install the new washer and lock nut.
26. Carry out the Ring Gear and Pinion Backlash procedure.
27. Assemble the differential bearing cups to the differential bearings.
28. CAUTION: Do not spread the differential housing more than specified.
CAUTION: Avoid nicking the ring gear teeth and the anti-lock speed sensor ring during assembly.
Using the special tools, spread the differential housing to the specification.
^
Use a rawhide hammer to seat the differential into the differential housing pocket.
-
Remove the special tools.
