F 350 4WD Super Duty V10-68L Bi-Fuel Differential Carrier Service and Repair
2. Thread two studs into the axle housing 180 degrees apart. This will eliminate rotation of the carrier assembly after it makes contact with the gasket
material.
3. WARNING: Secure the carrier to the jack to prevent it from falling. Failure to follow these instructions may result in personal injury.
Position the carrier into the axle housing.
4. CAUTION: Make sure the bolt threads are clean.
Apply Thread lock 262 E2FZ-19554-B or equivalent meeting Ford specification WSK-M2G351-A6 to the bolt threads, and install the bolts.
^
Remove the two alignment studs only after installing several of the bolts.
^
tighten the bolts in a cross pattern.
5. Install the axle shafts.
