F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
16. Using the special tool, verify the backlash.
^
The specification shown is the full allowable range.
17. Install the axle shafts.
18. Install the differential housing cover, and refill the rear axle with specified lubricant.
19. Install the driveshaft.
Differential Case and Ring Gear-One-Piece, Conventional
Differential Case and Ring Gear-One Piece, Conventional
Special Tools
Special Tool(s)
Disassembly
1. Remove the differential case;
2. Remove the ring gear bolts.
