F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Differential Case: Service and Repair
Disassembly and Assembly
Front Differential Case
Special Tools
Special Tool(s)
Disassembly
1. CAUTION: Do not reuse the bearings after removing them from the differential case.
Remove the differential bearings and the shims.
1
Place the differential into a vise with soft jaws.
2
Using the special tool, remove the differential bearing.
3
CAUTION: Discard any damaged shims at time of assembly.
Remove the differential bearing shims.
^
Wire the shims, the bearing cone, and the cup together. Identify from which side they were removed.
-
Repeat the procedure for the opposite side.
