F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Wiper Motor: Service and Repair
Windshield Wiper Motor
REMOVAL
1. Remove the cowl top vent panels.
2. Remove the wiper mounting arm and pivot shaft assembly.
1
Remove the five bolts.
2
Disconnect the electrical connector.
3
Remove the wiper mounting arm and pivot - shaft assembly.
3. Remove the bolt and the windshield wiper linkage.
4. Remove the bolts and the windshield wiper motor.
INSTALLATION
1. To install, reverse the removal procedure.