F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Hood Latch Release Cable: Service and Repair
HOOD LATCH RELEASE HANDLE - CABLE
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the hood latch.
3. Remove the pin-type retainers.
4. Position the air deflector aside to reveal the hood latch release cable guide.
5. Remove the hood latch release cable guide.
6. Remove the remaining hood latch release cable guides.
7. Remove the powertrain control module (PCM).
8. Remove the A-pillar lower trim panel.