F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Trim Panel: Service and Repair
Back Panel Trim Cover Trim Panel
Crew Cab
TRIM PANEL - BACK PANEL TRIM COVER, CREW CAB
REMOVAL
1. Remove the child safety seat tether anchor.
2. Remove the left and right rear corner trim panels.
3. Remove the four pin-type retainers.
4. Remove the back panel trim cover.
INSTALLATION
1. To install, reverse the removal procedure.
Regular Cab
TRIM PANEL - BACK PANEL TRIM COVER, REGULAR CAB
REMOVAL
1. Remove child safety seat tether anchor.
2. If equipped, remove the utility trays and jack assembly.
3. Remove the left and right rear corner trim panels.
4. Remove the four pushpins.