F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
^
Hand-tighten the fittings.
^
Tighten the upper fitting to 60 Nm (44 ft. lbs.).
^
Tighten the lower fitting to 60 Nm (44 ft. lbs.).
30. If equipped, install the EGR transducer bracket.
^
Position the bracket.
^
Install the bolts.
31. If equipped, connect the EGR transducer vacuum lines.
32. If equipped, connect the EGR transducer and the throttle position sensor connectors.
33. Connect the idle air control motor electrical connector and the bypass hose.
