F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Fluid Filter - A/T: Service and Repair
Fluid Pan, Gasket and Filter
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the transmission fluid drain plug and allow the fluid to drain.
3. Remove the transmission fluid pan and gasket.
4. Remove the transmission fluid filter.
5. CAUTION: Carefully remove the transmission fluid filter seal. Damage to the seal bore will cause transmission failure.
Inspect the transmission fluid bore for the transmission fluid seal. If the seal is in the bore, carefully remove the seal.
Installation