F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Child Seat Tether Attachment: Service and Repair
REMOVAL
SuperCab vehicles
1. From the bottom of the seat backrest, push the seat backrest upward, then pull the bottom outward and remove from the vehicle.
Regular cab vehicles
2. Position the front seat(s) forward.
Crew Cab vehicles
3. Position the rear seats forward.
Regular and CrewCab vehicles
4. Remove the bolt and the child safety seat tether anchor.
NOTE: The RH side is shown, all others are similar.
SuperCab vehicles
5. Remove the bolt and the child safety seat tether anchor.
NOTE: The RH side is shown, all others are similar.
INSTALLATION