F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
4. Remove the safety belt.
1
Remove the safety belt buckle.
2
Remove the safety belt tongue.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten bolts to specification.
2. Check the restraint system for correct operation.
Front 40/20/40 Seat, Center Safety Belt
REMOVAL
1. Remove the cap from the safety belt buckle nut.
2. Remove the safety belt buckle.
1
Remove the safety belt buckle nut.
2
Remove the safety belt buckle.
3. Remove the cap from the safety belt nut.
