F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Valve Body: Service and Repair
TorqShift
Main Control Valve Body
Special Tool(s)
Removal
1. Disconnect the battery ground cable.
2. Remove the transmission fluid pan, gasket and filter.
3. Disconnect the solenoid body electrical connector.
4. NOTE: While lowering the solenoid body, the manual valve may fall out of the solenoid body.
NOTE: While lowering the solenoid body, the forward clutch orifice may fall out of the transmission case.
Remove the solenoid body.
1
Disconnect the transmission range sensor electrical connector.