F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
CAUTION: Using the incorrect gaskets can cause damage to the transmission.
1. NOTE: Refer to correct gasket usage.
NOTE: If the valve body separator plate was not removed, proceed to Step 6.
NOTE: Apply a light film of petroleum jelly to the valve body separator plate prior to assembling the new gaskets.
Assemble the new gaskets to the valve body separator plate.
1
Main control to case gasket
2
Valve body separator plate
3
Main control to separator plate gasket
2. NOTE: Apply a small amount of petroleum jelly to each check ball prior to positioning them on the valve body separator plate.
Install eight rubber and one steel EPC check balls.