F 350 4WD Super Duty V8-5.4L (2009)
Ignition Coils, RH Valve Cover and Gasket
Removal
1. Drain the engine cooling system.
2. If equipped, remove the bolt and position the transmission filler tube aside.
3. Disconnect the quick connect coupling and position the crankcase vent tube aside.
4. Disconnect the heater coolant hose from the engine coolant crossover manifold assembly.
5. Disconnect the 2 PCM electrical connectors and the wiring harness retainers from the support bracket and position aside.
6. Disconnect the 4 RH ignition coil electrical connectors.