F 350 4WD Super Duty V8-5.4L (2009)
4. Using the Slide Hammer and the Crankshaft Rear Oil Seal Remover, remove and discard the crankshaft rear seal.
Installation
1. NOTE: Lubricate the crankshaft rear seal with clean engine oil prior to installation.
Using the Crankshaft Rear Oil Seal Installers, install a new crankshaft rear seal.
2. NOTE: Lubricate the crankshaft oil slinger with clean engine oil prior to installation.
Using the Crankshaft Rear Oil Seal Installers and the Crankshaft Rear Oil Slinger Installer, install a new crankshaft oil slinger.
3. Install the engine rear cover plate.
4. Install the flexplate or flywheel. For additional information, refer to Flexplate See: Transmission and Drivetrain/Flex Plate/Service and
Repair/Removal and Replacement or Flywheel See: Service and Repair/Removal and Replacement/Flywheel.
