ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Relays and Modules - Lighting and Horns > < Initial Inspection and Diagnostic Overview|Page 9391
Page 8
background image

If equipped with trailer tow mirrors, GO to Q6.

If not equipped with trailer tow mirrors, REPAIR circuit CLS30 (VT/WH) for a short to voltage. TEST the system for normal operation.

No

GO to Q7.

-------------------------------------------------
Q6 CHECK THE TRAILER TOW MARKER LAMP SUPPLY CIRCUIT FOR A SHORT TO VOLTAGE

-

Ignition OFF.

-

Disconnect: Battery Junction Box (BJB) Fuse 64 (5A).

-

Ignition ON.

-

Do the parking lamps continue to illuminate?

Yes

REPAIR circuit CLS30 (VT/WH) for a short to voltage. TEST the system for normal operation.

No

REPAIR circuit CBB64 (VT/GN) for a short to voltage. TEST the system for normal operation.

-------------------------------------------------
Q7 CHECK FOR CORRECT SJB OPERATION

-

Ignition OFF.

-

Disconnect all the SJB connectors.

-

Check for:
-

corrosion

-

damaged pins

-

pushed-out pins

-

Connect all the SJB connectors and make sure they seat correctly.

-

Operate the system and verify the concern is still present.

-

Is the concern still present?

Yes

INSTALL a new SJB. TEST the system for normal operation.

No

The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CLEAR the DTCs. REPEAT the
self-test.

-------------------------------------------------

Relays and Modules - Lighting and Horns > < Initial Inspection and Diagnostic Overview|Page 9391