F 350 4WD Super Duty V8-5.4L (2009)
Stabilizer Bushing: Service and Repair
Stabilizer Bar Bushing
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 4 stabilizer bar bracket nuts and the 2 stabilizer bar brackets.
-
Discard the nuts.
-
To install, tighten the new nuts to 48 Nm (35 lb-ft).
3. Position the stabilizer bar to access the bushing.
4. Remove the bushing.
5. To install, reverse the removal procedure.