F 350 4WD Super Duty V8-5.4L (2009)
2. NOTICE: Be careful when installing the output shaft not to damage the seals.
If the output shaft was removed, install the output shaft and park gear assembly.
3. Install the park pawl shaft.
1. Install the park pawl shaft.
2. Install the park pawl.
3. Install the park pawl return spring.
4. Install the parking rod guide plate and parking rod guide plate-to-case bolts.
-
Tighten to 25 Nm (18 lb-ft).
5. Install a new extension housing gasket.
6. Install the extension housing and the 9 extension housing-to-case bolts.
-
Tighten to 47 Nm (35 lb-ft).