F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Pedal Positioning Motor: Service and Repair
Brake Pedal Motor
Removal and Installation
1. Place the gearshift lever in first gear.
2. Disconnect the brake pedal motor electrical connector.
3. Disconnect the brake pedal motor-to-accelerator pedal cable from the accelerator pedal by pulling the cable retainer outward.
4. Disconnect the brake pedal motor-to-brake pedal cable from the brake pedal by pulling the cable retainer outward.
5. Disconnect the transmission shift cable from the steering column shift tube lever.
