F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
6. Connect the heated seat switch electrical connector.
All seats
7. Position the side trim cover. Install the three trim cover screws.
-
The seat backrest pivot bolt shaft must be inserted into the cover standoff.
8. Push the rearward lower corner of the side shield to engage the metal retaining clip.
9. Position the lumbar adjuster control and install the two mounting screws. Install the adjuster knob.
10. Position the seat back recliner lever cover and install the screw.
11. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the front seat
