F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
1. CAUTION: To prevent engine damage, you must always install four new bolts when installing the vibration damper.
NOTE: Do not use anti-seize compounds, grease or any lubricants. Lubricants have an adverse effect on the torque results.
Install the crankshaft vibration damper and bolts.
^
Tighten the bolts in the sequence shown.
^
Tighten the bolts to 68 Nm (50 ft. lbs.).
^
Tighten the bolts an additional 90 degrees.
2. Install the accessory drive belt.
Vehicles with dual generator
3. Install the dual generator pulley and bolts.
4. Install the dual generator accessory drive belt.
