F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
5. Disconnect the glow plug controller electrical connectors and the wiring retainer.
6. Remove the nuts and the glow plug controller.
Vehicle with automatic transmission
7. Remove the nut and position the transmission fluid indicator and tube assembly aside.
All vehicles
8. CAUTION: To prevent engine damage, do not use air powered tools when installing the valve cover.
NOTE: Mark, the position of the valve cover bolts for valve cover bolt installation.
Remove the eleven bolts and the valve cover. Clean and inspect the valve cover gasket and install a new gasket, if necessary.
9. To install, reverse the removal procedure.
