F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Engine Oil Pressure: Testing and Inspection
Oil Pressure Test
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of damage.
3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the concern is not visually evident, check the base oil pressure.
5. NOTE: Using a suitable adapter (such as Aeroquip @ 2022-4-4S), install it in the engine oil pressure sensor hole to perform the base oil pressure
test.
NOTE: The engine is removed for clarity.
Install the tool and check the base oil pressure. The minimum engine oil pressure specifications are 82.7 kPa (12 psi) at 700 rpm, 165.5 kPa (24
psi) at 1,200 rpm and 310.3 kPa (45 psi) at 1,800 rpm with the engine at operating temperature.
6. If the concern is not evident, verify the symptom. GO to Symptom Chart. See: Testing and Inspection/Symptom Related Diagnostic Procedures