F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Intake Manifold: Specifications
Late build
Intake Manifold
Install the intake manifold and bolts and tighten in the following sequence.
In the sequence shown.
1
Loosely install bolts 1-8.
2
Tighten bolts 9-16 to ................................................................................................................................................................. 11 Nm (8 ft. lbs.).
3
Tighten all bolts to ..................................................................................................................................................................... 11 Nm (8 ft. lbs.).
Early build
Intake Manifold
Install the intake manifold and bolts and tighten in the following sequence.
In the sequence shown.
1
Loosely install bolts 1-8.