F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
1. NOTE: Do not tighten the nuts at this time.
NOTE: Apply anti-seize lubricant to the turbocharger inlet Y-pipe bolts.
Position the 2 parts of the turbocharger inlet Y-pipe into the vehicle. Install the gasket connect the turbocharger inlet Y-pipe and loosely install the bolts.
Position the turbocharger inlet Y-pipe on the exhaust manifolds.
2. NOTE: Do not tighten the clamp at this time.
Install the metal gasket on the EGR cooler and align the turbocharger inlet Y-pipe to the EGR cooler. Position the clamp.
3. NOTE: Do not tighten the nuts at this time. NOTE: LH shown RH similar.
Apply anti-seize lubricant to the turbocharger inlet Y-pipe bolts then install the bolts and nuts.
4. Install the turbocharger.
